Instrumentation And Control Engineering Trainers - Instrumentation And Control Training Equipment, Flow Control System Trainers

Instrumentation And Control Engineering Trainers

We are engaged in manufacturing and supplying Instrumentation & Control Engineering Trainers that comprise Computerized Flow Control System Trainer (PCST 01), Computerized Level Control System Trainer (PCST 02), Computerized Water Pressure Control System Trainer (PCST 03A), Computerized Air Pressure Control System Trainer (PCST-03B). These instrumentation and control training equipment are assembled with Computer Interface (Optional), SCADA software that helps in analyzing the flow control system trainer.

Flow Control System Trainer

Item Code: PCST-01

We manufacture high performance Flow Control System Trainers. This is the system, which outlines the basics of Closed Loop Flow Control and aspects related to it.

Features:

Compact Ergonomic Design
User Friendly, Self Explanatory Systems
Leak proof Safety Measures, sturdy piping.
Enhanced Electrical Safety Considerations
Training Manuals, mimic Charts for Operation Ease
System Frame with Caster Wheel Arrangement for ease in movement
M.S. powder coated cubical plant with standard Instrument Mountings
Inbuilt Safety Measures to avoid improper usage.
Computer Interface (Optional), SCADA software connectivity for analysis of Flow Control System Trainer

Key Words

Feedback control
Feedback Flow control.
PID control
P, P I, P I D CONTROLLER ACTION

Range Of Experiments

Study of single loop proportional (P), integral (I) and derivative control (D).
Study of operation and calibration of transmitters, I/P converters and valves
Study of programming and operation of PID controller
Study of stability of single loop Flow Control System
Configure microcontroller based controller to give manual output
Changing controller modes (Manual/Auto), Checking ON-OFF
Proportional, integral, derivative, PI and PID control actions, change local set point, configure and run a set point ramp, configure measured values to either percentage or engineering units.
Auxiliary experiments
System Dimension: 4.5 Ft. (L) X 1.5 Ft. (W) X 4.5 Ft. (H)

Services Required:

Water supply and drainage arrangement
Electric supply 230 V AC, 50 Hz
Clean, dry and dust free Compressed air supply 2.1kg/cm^2

Add to Enquiry Basket

Computerized Flow Control System Trainer (PCST-01)

The Flow Control System Trainer is the system, which outlines the basics of Closed Loop Flow Control and various aspects related to it.

Features:

Understand the concept of feedback FLOW control loop.
User Friendly, Self Explanatory Systems
Leak proof Safety Measures, sturdy piping
Enhanced Electrical Safety Considerations
Training Manual & Mimic Charts for Operation Ease
System Frame with Caster Wheel Arrangement for ease in movement
M.S. powder coated cubical plant with standard Instrument Mountings
Inbuilt Safety Measures to avoid improper usage
Computer Interface (Optional), SCADA software connectivity for analysis of Flow Control System Trainer

For more detail technical specifications, plz download the below PDF file.

Computerized Flow Control System Trainer (PCST-01)

Add to Enquiry Basket

Level Control System Trainer

Item Code: PCST-02

We have the capability to manufacture and supply high quality level control systems. These Level Control System Trainers outline the basics of closed loop Level Control Process and other aspects related to it.

Feature

Compact Ergonomic Design
User Friendly, Self Explanatory Systems
Leak proof Safety Measures, sturdy piping
Enhanced Electrical Safety Considerations
Training Manuals mimic Charts for Operation Ease
System Frame with Caster Wheel Arrangement for ease in movement
M.S. powder coated cubical plant with standard Instrument Mountings.
Inbuilt Safety Measures to avoid improper usage.
Computer Interface & SCADA software connectivity for analysis of Level
Control System Trainer (Optional)

Keywords

Feedback control
Feedback Level control
PID control
P, P I, P I D CONTROLLER ACTION

Range Of Experiments:

Study of single loop proportional (P), integral (I) and derivative (D) control.
Study of operation and calibration of transmitters, I/P converters and valves.
Study of stability of single loop level control system.
Study of cascade control to be used in conjunction with PCST-01 FLOW Control trainer system (optional).
Implement distributed control TDS- 2001 when used in conjunction with computer control system (Optional).
Configure microcontroller based controllers to give manual output, changing controller modes (Manual/Auto), checking ON-OFF, proportional, integral, derivative PI and PID control actions, change local set point, configure and run a set point ramp, configure measured values to either percentage or engineering units.
Demonstrate the proportional control of level, with offset, overshoot, instability and optimum value of proportional band or gain.
Demonstrate the effect of integral control and the optimization of the integral (reset) time for level control, P+D & P+I Control action for Level.

Add to Enquiry Basket

Computerized Level Control System Trainer (PCST 02)

The Level Control System Trainer is the system which outlines the basics of closed loop level control process and other aspects related to it.

Some Additional Features:

Compact Ergonomic Design.
Computer Interface & SCADA software connectivity for analysis of Level Control System Trainer (Optional)

System Dimensions: 4.5 Ft. (L) X 1.5 Ft. (W) X 4.5 Ft. (H)

Services required:

Water supply and drainage arrangement, Electric supply 230 V AC, 50 Hz.
Clean, Dry Compressed Air Supply at 2.1 Kg/cm².

For more detail technical specifications, plz download the below PDF file.

Computerized Level Control System Trainer (PCST 02)

Add to Enquiry Basket

Air Pressure Control System Trainer

Item Code: PCST-03B

Our air pressure systems are designed to have a compact, ergonomic design which makes it a very user friendly system. The Pressure Control System Trainer is the system which outlines the basics of Pressure Control loop (Air Pressure) with associated aspects.

Features:

Compact Ergonomic Design
User Friendly, Self Explanatory Systems
Leak proof Safety Measures, sturdy piping
Enhanced Electrical Safety Considerations
Training Manuals mimic Charts for Operation Ease.
System Frame with Caster Wheel Arrangement for ease in movement
M.S. powder coated cubical plant with standard Instrument Mountings
Inbuilt Safety Measures to avoid improper usage.
Computer Interface & SCADA software connectivity for analysis of Pressure Control System Trainer (Optional)

Keywords

Feedback control
Feedback Pressure control.

Range of Experiments:

Study of single loop proportional (P), integral (I) and derivative (D) control.
Study of operation and calibration of transmitters, I/P converters and valves.
Study of programming & operation of PID controller.
Study of stability of single loop control system.
Configure microcontroller based controllers to give manual output, changing controller mode (Manual/Auto), Checking ON-OFF, proportional, integral, derivative PI and PID control actions, change local set point, configure and run a set point, configure measured values to either percentage or engineering units.
Demonstrate proportional control of pressure, with offset, overshoot, instability and optimum value of proportional band or gain.
Demonstrate the effect of integral control and the optimization of the integral (reset) time for pressure control.

Services Required:

Single-phase electrical supply of 230V, 50Hz
Clean, dry Compressed air supply at 7-8Kg/Cm^2

Add to Enquiry Basket

Computerized Air Pressure Control System Trainer (PCST-03B)

The Air Pressure Control system trainer gives an idea regarding the Pressure Control Loop (Air Pressure) and aspects related to it.

Key Words:

Feedback control
Feedback Pressure control
PID control
P, P+I, P+I+D Controller Action

For more detail technical specifications, plz download the below PDF file.

Computerized Air Pressure Control System Trainer (PCST-03B)

Add to Enquiry Basket

Computerized Water Pressure Control System Trainer (PCST 03A)

Computerized Water Pressure Control System Trainer (PCST 03A)

The Water Pressure Control system trainer gives an idea Regarding the Pressure Control loop (Water Pressure) and Aspects related to it.

System Dimensions: 4.5 Ft. X 1.5 Ft. X 4.5 Ft. (H)

Services Required:

Water supply and drainage arrangement
Single-phase electrical supply: 230VAC 50Hz
Clean, dry compressed Air supply at 2.1 Kg/cm²

For more detail technical specifications, plz download the below PDF file.

Add to Enquiry Basket

Computerized Temperature Control System Trainer (PCST-04)

The Temperature control system trainer is the system which outlines the basics of Temperature Control loop and other aspects related to it.

Temperature Cabinet Dimension: 1.25 Ft. (L) X 1.25 (W) X 2 Ft. (H)

System Control Panel Dimensions: 1Ft. (L) x 1Ft. (W) x 1Ft. (H)

Services Required: Electric supply 230 V AC, 50 Hz

For more detail technical specifications, plz download the below PDF file.

Add to Enquiry Basket

Computerized Water Temperature Control System Trainer (PCST-08)

Computerized Water Temperature Control System Trainer (PCST-08)

The Temperature control system trainer is the system which outlines the basics of Closed Loop Temperature Control and aspects related to it.

Range of Experiments:

Study of single loop proportional, integral and derivative control
Study of operation and calibration of sensors/transmitter
Study of stability of single loop control
Configure micro controller based PID to give manual output
Manual or Auto, give ON-OFF, proportional, integral, derivative PI and PID
Control, change local set point, configure and run a set point ramp, configure
measured values to either percentage or temperature

For more detail technical specifications, plz download the below PDF file.

Add to Enquiry Basket

Heat Exchanger Temperature Control Module Trainer

Item Code: PCST-07

The Heat Exchanger Temperature Control Module(PCST -07) manufactured by us is a setup which outlines the basic of Tube & Shell Heat Exchanger. It has the following
Features

Compact Ergonomic Design
User Friendly, Self Explanatory Systems
Leak proof Safety Measures, sturdy piping
Enhanced Electrical Safety Considerations
Training Manuals mimic Charts for Operation Ease
System Frame with Caster Wheel Arrangement for ease in movement
M.S. powder coated cubical plant with standard Instrument Mountings
Inbuilt Safety Measures to avoid improper usage.
Computer Interface (Optional)
SCADA software connectivity for analysis of temperature control loop using Tube and Shell type heat exchanger. (Optional)

System Components

Tube & shell type heat exchanger.
Water heating system
Hot & cold water storage tanks.
Hot & cold-water circulation system.
Flow monitoring on rotameter
Four nos RTD temperature sensors for inlet & outlet temperature of tubes & Shell
Temp. Transmitter with 4-20 mA o/p for both inlet & outlet/Temperature
Sensors compatible with four point temperature Indicator
Pump for HWT / CWT.
Pneumatically operated control valve & electroneumatic converter for regulation of hot water through shell for control of cold water outlet temperature
PID controller with RS- 232 port connectivity